What are the common English terms of injection mold?

What are the common English terms of injection mold?

Injection mold is a field involving many complex components and structures, the following are some common 20 injection mold professional terms in Chinese and English glossary:

(01) Injection Molding: Injection molding, which is the process of making plastic products.
(02) Molding Machine: The device for performing injection molding.
(03) Die: A tool for making plastic products of a particular shape and size.
(04) Die Set: A die set consisting of a combination of two or more dies, usually used to make plastic products with complex shapes.
(05) Cavity: one or more cavities in the mold for receiving the plastic material and forming the product.
(06) Core: mold core, one or more cylindrical structures in a mold, used to form the internal shape of a plastic product.

(07) Melt: Molten plastic, refers to the polymer material heated to a flowing state.
(08) Plastic: plastic, an artificial or semi-artificial polymer material.
(09) Plastic Material: plastic material, plastic particles or powders used for injection molding.
(10) Fill: Fill, refers to the process of injecting plastic material into the mold.
(11) Packing: The process of maintaining pressure, after filling is completed, the mold continues to maintain pressure on the plastic products.
(12) Cycle Time: Cycle time, the time required for the whole process from filling to taking out the product.
(13) Flash: flash edge, mold parting surface or excess plastic on the product.
(14) Weld Line: a linear trace formed by the confluence of two streams of molten plastic.
(15) Shrinkage: the reduction of the size of plastic products during cooling.
(16) Warpage: Warpage, distortion of the shape of plastic products due to uneven cooling.
(17) Groove: The gate, the slit in the mold that guides the molten plastic into the mold hole.
(18) Ejector Pin: ejector pin, a metal rod used to ejector the product from the mold.
(19) Bushing: Bushing, a metal sleeve used to support and guide moving parts.
(20) Screw: screw, used to fasten and connect the mold parts of the screw.

The above are just some common English terms and words of injection mold, and there may be more professional words and expressions in practical applications.